1791261

$10,018.80 $8,765.75*
  • Manufacturer: Powermatic
  • Model: 201
  • Size: 22-inch, 7.5hp, 230v, 1ph
  • Condition: New
INQUIRE ABOUT THIS ITEM EMAIL A FRIEND PRINT
This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1/16 with each turn of the hand wheel. The model 201 is available with a 7-1 /2 horsepower, single-phase motor. This planer is perfect for the small to medium shop with continuous planing requirements. Cast iron 1300 lb. construction for solid performance without vibration2 feed speeds - 20/30 fpm - accommodates rough and fine finish work. Segmented infeed roller with sectional chipbreaker allows multiple board planing4-knife head offers 19,200 cuts per minute and widest capacity in its class. Roller bearing-mounted feed rollers for long life. Adjustable bed rollers allow smooth feeding of rough or finished workpieces. Oversized cast iron table travels on 2 large lead screws for heavy duty support.
Standard Equipment: Dust collection chute with 5" port, Adjustable foot pads, Knife setting gauge, Tool kit (6, 8, and 10mm wrenches, 12-14mm, and 22-24mm combination wrenches).

*Promotion ends December 31 2017
Maximum Planing Width: 22"
Maximum Planing Depth: 3/16"
Minimum Planing Thickness: 1/8"
Maximum Planing Thickness: 9-1/4"
Minimum Planing Length: 10"
Cutterhead Diameter: 3-1/4"
Cutterhead speed: 4,800 RPM
Number of knives: 4
Cuts per minute: 19,200
Feed rate: 20 / 30 FPM
Segmented Infeed Roller Diameter: 3"
Outfeed Roller Diameter: 3"
Bed Roller Adjustable from Front: 2
Table size: 32-1/4" x 24"
Table Support: 2 Columns
Table Adjustment height: Manual, 1 turn = 1/16"
Dust Collection Minimum Required: 900 CFM
Dust port O.D.: 5"
Motor: 7-1/2 HP, 230v, 1ph
Recommended Circuit Size: 50 Amps
Overall Dimensions: 42" long x 49" wide x 59" high
Net weight: 1,350 lbs
Shipping weight: 1,430 lbs